Page History

Setting the priority rules for Next Ticket NextTicket is different for every MSP and depends on how a business wants to prioritize tickets. It is also not a one-shot procedure wherein the tickets fall into place in one go. Instead, you have to tweak the settings until you get the list that follows your required prioritization. This page shows an example of how to do this. 

Important: This information applies to NextTicket for ConnectWise Manage only.

User case requirement: Configure Next Ticket NextTicket to give the highest priority to the following:

...

The new rule that you have applied may be affected by the other existing priority rules. To test how other rules affect your new rule: 

1. Select the user for whom you are testing the rule.
2. Click Test All on the upper right-hand corner of the screen. This will apply all the rules in the configuration.
   Image Modified 
3. Check the new list on the Test Passed Data window. It should apply the new rule that you have just set. If there are tickets that seem to be misplaced or are not prioritized correctly, scroll to the right and check which existing rule could possibly be overwriting your new rule. 
   
   For this page's example, the first two entries on the list are prioritized more than the third entry.
   
   
   After scrolling to the right to check, you will see that the Schedules Status Priority Rule is deprioritizing the third rule because the former is set to prioritize all expired tickets above everything else. The third ticket on the list is thus deprioritized.  
   
   
4. Once you have identified the overwriting rule, go to its corresponding section in the Priority Point rules to view and adjust accordingly.
5. Click Test All again to check. Do steps 1 to 4 until the priority list shows your desired prioritization.